Nuck, and Still Jill, my computer advicer said you have to check first the voltage of the power, you are using and how it changes in time, and then think about viruses. W8R is right about linux, but the main thing is to change hardware, software, and the way you are doing things. If someone gets hold of your behaviour patterns, he can figure out how to harm you. I wish you luck, friends!
TBscam is currently showing increased activity at the usual pit between R2 & R3. White steam pouring out @ 19.30ish JST. Looks pretty murky in the Tepcam view too. Saw the now usual lights flickering at base of vent stack 2 there. 'Worklight' also area looks unusually bright to me. Seems more covering up going on at the base too……… No doubt another stirring of the corium.
A couple of days ago ..I looked at beams entering the view..TEPCO from the right..at present… light can be seen in the same area..CSFP.
Unit 4 shows heavy emissions..
The emissions on the outside left… of Unit 1 is increasing.
TBS webcam shows poor resolution..only done when they dont want visuals of the reactors used for comments. At least its better than yesterdays FOG out. But both Reactor 1 and 4 look active–guess 4 is a visual problem as its soon to have a tent like Reactor 1. Strange we never hear of Reactor 1 or much of Reactor 3. Just work on 4 and new efforts on Reactor 2 with a robot. Now ignoring reactor 1..which was the first one "tented"..or covered up from view more likely..makes a person question the damage there. Especially as we see frequent flashes inside the "tent"..and emissions. Reactor 2 is bad, but it could be Reactor 1 is the "smoking gun" based on LACK of comments.
Also, the TECPO webcam seems to be down at one major Japanese website, TBS is up. Whats with that? And is the video on this page active feed or copy from TEPCO..??
TEPCo is up..now..and I don't believe it to be loop.
The light behind the worklight is increasing..notice on the left side of the light.
JNN..darkened.
The Fukushima 3D Map is now ready for download (Version 1).
It is generated in the Unreal Development Kit, a 3D gaming system and is intended as a free educational tool to explore the campus and surrounds of Fukushima Daiichi. It's certainly not 100% accurate though, so please don't expect an epic quality, detailed experience.
The map has been packaged with the UDK into a 270MByte file.
It can be run and installed on a Windows PC. It contains all that is required (there maybe a Windows DirectX update).
A more permanent location for the file is being sort, but in the meantime it can be found at the link at the end of this posting.
the night 17/18 was pretty steamy but since that night i didn't can start my computer.
so it could take some days before i can load em up.
on the tbs record you can see that the white steam is coming from the area rea 5&6.
i'm talking about that event: http://youtu.be/jtNN_9j3Wgw
@richard:
i'm burning to fix my systems as fast i can, sounds amazing what you had made.
@pure water:
one of the last things that i coud do was to check the voltages:
all were lower,like 12=11.71 3=2.89 etc
my question is now:
is that to low or not?
i had open the voltage and one of the elkos looks heated.
not to much that he had opened his head but i can see that there was some pressure in it/the black eloxyd is visible.
and there is now changing if i had plugged all devices or not to the voltage.
graficcard is also out, i use the onboard…
yesterday after some "push the buttons" reset with the high energy boost bios came but then it went black…
i had troubbles with my usb-ports onboard since some months and on that place is on elko def. overheated.
i had heared the voltages dying at the last three months, every hour a bitly more.
my rita said:"you didn't hear him crying?come on,have some mercy with him and give him a break"
me:"him?IT is a machine,build for working,bought for working and come on, what is one year nonstopless working?
i doe this for fourty years now , my sweatheart"
in my mind i thought we all gone to die,
somewhere,sometimes.
@ richard:
the first screenshot shows a view like the regular tepco sreaming camera does.
from north to south with reactor 1-4 and the three pipes in the view.
but your grafics from reactor 1 & 2 are wrong.
reactor nr 1 had still the iron-inlet from the last upper stores standing.
reactor nr 3 is not demaged on one hight.
the west-wall is stiil standing with the iron inlay and the damage is going deeper from west to east, with the lowest point corner north-east.
and yape, you said you will work on the optics.
take it as a positive tip and feel you free to use from next link everthing as you want: http://photobucket.com/fukunuk
@ all:
4545… & i are sure that the blue light was fukushopped,
taken from one of the blue hours from tbs.
verry suspected is a comment on fukudiary who said:
that at time the light were visible on tepcocam too.and as i looked it was just the blue lense flare in the pipe in front of rea 4 (30-50 meters,lol) and,
thats more importent,
the blue lense flare is visible since they plugged in their working light.
okay,
my comment was not published and i was wondering me…is that the man for that 4545.. and i spend hours and hours to bring online the missing hours for example?
and no fckng short email about why my comment is not posted?
that in the comment the proof of the nonsens in the thread was could be a reason for deleting it too. http://fukushima-diary.com/2012/04/blue-light-observed-near-reactor-4/ http://youtu…
this project has already cost me two weeks. i have no more time to do all the other details.
i am well aware that it is not accurate .. it's called an 'artist's impression'.
maybe over the ensuing decades of decomissioning to come there will be spare time to enhance the map. of course, i'll be dead by then.
for now, i've got a life to get back to, just in case
but please, download it, roam around it. it's a model to give some idea of scale and proximity. Nothing more. It would take a year of work to get it to accurate detail.
for me, i've enjoyed going from the perspective of the webcam and then flying around the square miles of the site. i am now far more aware of the overall structure of the site.
lastly, the original site model was by another artist and i am grateful for the massive work he/she had already done. i've compiled several sources into this project.. so it's not all my effort in the first place. projects such as this would normally take a team of people… not one player such as humble little old me.
whoah, pure water! thanks for the heads up! watching live from here. totally panning of the entire facility hurrah! http://realitycheck.no-ip.info/fukushima.html
this page has a live chat right next to the TBS/JNN cam for any who would like to comment … i drool for nuckelchen!
Changing the view took them several minutes. And before that it was fixed for more than an hour, as far as I was watching. Coincidence? This is possible too.
On the other hand I was able to see the buildings on the right of R4. There were some bright light evevnts in front of the highest among the structures there.
And now the screen went gray, while tepco camera shows a bright sunny day… and I have no more time for now.(I will read everything later, watching and reporting was a priority now.)
I'm still shocked by how badly R4 looks to be leaning. There now looks to be a big pipe running from the right of the building and a couple of work vehicles being busy, so work is underway on the new 'tent' I presume.
That was a trip! Right now, before my eyes,…I was watching the second youtube channel Wotcha posted above,….and tepco wiped the screen?, or a shadow passed before it, leaving a 'lens filter' behind? Almost like at the eye doctor. They changed the bloody resolution for the WAY WORSE! IT was all clear,..Yes,…I could SEE what was going on actually! Crap!
Shows the demolition of R4 with works machine tearing away at top right corner. Not sure what that white thing seen at middle front of building – it elevates and retracts. Is it ready-mixed concrete being put up for support??
Now TBS is shut, and tepco camera works. Gray sky and static cranes now.
And I worry about Nuck and his computer. May be he needs a live linux, or a new place, or a new computer. Come on, Nucky, say a word from somewhere!
without any booting from the hardware a linux-live-cd won't work.
but we should make a special one at nexts.
for stream-recordings and easy video editings.
with timelapse function, a converter for the flv records.
or better would be a video-editor-software that can work with flv..
the funniest at all is that 4545…had a total system breakdown one month ago….i will ask him what was the matter…
Rethink your whole system. Both you and 45… need to figure out how do they track you. If it was possible to distribute the whole process between different machines at different places, it will become clear easily. But I am dreaming now. If you were earnest money makers, you would not have the time to search for the truth.
And I know a person who lost a computer under installed linux just by lurking through facebook.
Take care!
Tepcam 18.50ish JST shows lights/fires broken out again at base of vent stack 2. This 'pit' area looks even more covered up by Tepco (blurring/fake plants?).
The TBScam view has again gone AWOL, maybe covering up what is more visible at night there, such as the recent blue light?
Oh Nuckie Darling, If I had any $$$ and weren't sehr pauper, ich woulda send u mucho dinero to buy all the top tech machines you want and need. Your work is great. Aber ich can only send blessings and love! Me miss u 2.
@pure water I see what you mean about the cam going crazy. Looked like it was breaking down but it seems ok now. Very odd. I haven't seen any recent news about R1 – strangely quiet, but I'm not optimistic about it.
I don't like this new TBS view they are showing us. I wanna see the other half please, not just R4. The poor resolution and just blue is so bad, but 454541919 has been doing a great job on these poor views, such as:
09：41-16:11 21.4.12
I continue to be amazed at that demolition going on right by the R4's SFP, supposedly still loaded with fuel rods. How can that be? Would anyone else please like to comment on this too ………….
It is generated in the Unreal Development Kit, a 3D gaming system and is intended as a free educational tool to explore the campus and surrounds of Fukushima Daiichi. It's certainly not 100% accurate though, so please don't expect an epic quality, detailed experience.
Magnitude
4.5
Date-Time
Sunday, April 22, 2012 at 09:45:23 UTC
Sunday, April 22, 2012 at 06:45:23 PM at epicenter
Time of Earthquake in other Time Zones
Location
37.302°N, 141.217°E
Depth
24.5 km (15.2 miles)
Region
NEAR THE EAST COAST OF HONSHU, JAPAN
Distances
40 km (24 miles) NE of Iwaki, Honshu, Japan
75 km (46 miles) E of Koriyama, Honshu, Japan
83 km (51 miles) SE of Fukushima, Honshu, Japan
222 km (137 miles) NE of TOKYO, Japan
Tepcam: 'worklight' seems brighter tonight Are they burning the demolition debris from R4 in this area? Please see the clip I posted @ 6.21 a.m. – the red machine is tearing away at the building and so near to the SFP.
Coverup TEPCO webcam–the dark areas get larger and larger. Now they coverup the bases of objects on the right side of the screen.
Grading the view of TEPCO, Reactor 2, Reactor 1, Reactor 4/3. Steam/emissions are heavy over Reactor 2 and of course the whole area towards the right of the screen. Only major changes, the light to the side of Reactor 4 is larger and seems to grow and shrink.
There are now on the TEPCO live cam streaks of light on the upper right side of the bright light as well as those on the upper left. The steam or smoke is more. There is definitely something going on at the Centralized Waste Radiation Treatment Facility. Incineration?
Maybe burning debris from demolition of R4? It's been raining there as well and the place reacts badly to rain, gets steamy. But I do think they are burning stuff and it's being obscured by the light.
TBScam continues to be a waste of space – remains black. I reckon they turn either turn it off or turn the lights down at night so they don't have to monitor it.
TBScam video..they got cute and put up a photo–not live. When you click to stream..shows the black screen of death..
Now, how many people will notice the FAKE TBS photo instead of the live footage. OH..the fake photo..shows LOTS of emissions and radioactive events in Reactor 1 and 2, vent of Reactor 3 looks like a major burning event at the foot, plus Reactor 4 has a live flame. Wonder WHO picked THAT photo to use???
Raining now and tepco camera`s screen is covered with rain drops.No TBS/JNN.
Reding the posts above, I can add this: http://www.youtube.com/watch?v=eOTcFpjsGtk
Explains many of the things, already said. Stay out of this rain!
@pure water Good video capture. Both webcams are carefully managed by Mr. TEPCOman. The emissions just keep streaming out, and behind the "bright light" coverup — Reactors 5 AND 6 –are they showing flashes? Could just be the rain drops, but since they coverup..must assume its a bad or worse situation for those two reactors.
Still the "floating" crane at Reactor 1, the "perfect" sides of Reactor 2, and lighting/pasted sides of buildings–just makes us all feel "safe"..right?
Thank you for being there! And to ENENEWS Admin, Nuckelchen, Anne, Wotcha, Whoopie..and many more who have to "wade" thru the hours to find visual proof of radiation contaminating OUR worlds .
This vid scares me. Looks like a huge cloud of fuku-spew over R2 and/or coming from R5-6! The camera screen is strangely seizing up. Movement of sections of the picture appear to fold/morph quickly then go back to normal, as though the cam is reacting to explosions with sudden jerking motion. The light show is stupendous under this big tent and continuous! Whatever is spewing in huge clouds in this vid, I count from (Sun) 4-22 4-5am (Japan time so actually this happens (Sat) 4-21 Noonish, PDT), plus two or three days (after checking the latest jet stream) until it hits the west coast, approximately Wednesday this week. Never mind potential contamination of the jet stream by Mitsui chemical explosions (lacking full disclosure of potential hazard, as usual).
Numerous oil rig disasters, continuous Corexit spraying, radiation leakages/bomb test fallout, and volcanic gases pouring up into the atmosphere equal an Epic, Worldwide, Technology Failure. It's hard to tell which is going to come first, an ELE from a natural solar 'kill shot/' earth changes or an ELE from man made disasters- Lord have mercy on all life forms.
WTF??!!! If I had been watching that live I would have wet my pants! The live TEPCO cam looks really bad right now. The "fog" seems strategically placed….
Your identity will not be made public unless you request it
Receive Occasional Enenews Newsletters
sending...
SUPPORT ENENews
ENENews receives no funding from anyone or anything, except 1) People who donate via the button below, and 2) Google, who pays for the two ad spots. Thanks to all who have donated or are planning on doing so, it's nice to know people appreciate your work.
sending...
Nuck, and Still Jill, my computer advicer said you have to check first the voltage of the power, you are using and how it changes in time, and then think about viruses. W8R is right about linux, but the main thing is to change hardware, software, and the way you are doing things. If someone gets hold of your behaviour patterns, he can figure out how to harm you. I wish you luck, friends!
Report Comment
TBscam is currently showing increased activity at the usual pit between R2 & R3. White steam pouring out @ 19.30ish JST. Looks pretty murky in the Tepcam view too. Saw the now usual lights flickering at base of vent stack 2 there. 'Worklight' also area looks unusually bright to me. Seems more covering up going on at the base too……… No doubt another stirring of the corium.
Report Comment
Large amounts of convection from reactor 3 today. Keep an eye on it.
Last 5 minute solar data shows a large spike in the k flux of our magnetosphere. Odds are some interesting quakes with large +4.0 Eq's to follow.
Report Comment
As a child there was a TV show called "Romper Room" where my 4 year old mind was told every day:
"Dont be a 'dont bee' be a 'do bee'"
Bzzzz
Report Comment
Sorry, no comprendez.
Report Comment
Wotcha`s and Tacomagroove`s words illustrated:
http://www.youtube.com/watch?v=8R3oXrqIPuE&list=UUDu1KkkwuzybKx6MXQgGHuw&index=4&feature=plcp
http://www.youtube.com/watch?v=uZPOVJLdKtM&list=UUDu1KkkwuzybKx6MXQgGHuw&index=5&feature=plcp
Report Comment
You can choose anything from this night. I gave a link to just one episode.
Report Comment
Look once again and tell me this stupid tent is doing significant protective work, and people can come to their homes near this place:
http://www.youtube.com/watch?v=eHTuIYfusE8&list=UUuoE4ixZbEN75entP-kHtiQ&index=4&feature=plcp
Report Comment
A couple of days ago ..I looked at beams entering the view..TEPCO from the right..at present… light can be seen in the same area..CSFP.
Unit 4 shows heavy emissions..
The emissions on the outside left… of Unit 1 is increasing.
Report Comment
Unit 4 looking mighty hot with vapors steaming on Fuku1live. Didn't look that bad at dusk.
Report Comment
TBS webcam shows poor resolution..only done when they dont want visuals of the reactors used for comments. At least its better than yesterdays FOG out. But both Reactor 1 and 4 look active–guess 4 is a visual problem as its soon to have a tent like Reactor 1. Strange we never hear of Reactor 1 or much of Reactor 3. Just work on 4 and new efforts on Reactor 2 with a robot. Now ignoring reactor 1..which was the first one "tented"..or covered up from view more likely..makes a person question the damage there. Especially as we see frequent flashes inside the "tent"..and emissions. Reactor 2 is bad, but it could be Reactor 1 is the "smoking gun" based on LACK of comments.
Also, the TECPO webcam seems to be down at one major Japanese website, TBS is up. Whats with that? And is the video on this page active feed or copy from TEPCO..??
Report Comment
TEPCo is up..now..and I don't believe it to be loop.
The light behind the worklight is increasing..notice on the left side of the light.
JNN..darkened.
Report Comment
@ Heart – I "see the light"….
Those little red stairs are HOT!
Report Comment
Yes..HOT.
Report Comment
The Fukushima 3D Map is now ready for download (Version 1).
It is generated in the Unreal Development Kit, a 3D gaming system and is intended as a free educational tool to explore the campus and surrounds of Fukushima Daiichi. It's certainly not 100% accurate though, so please don't expect an epic quality, detailed experience.
The map has been packaged with the UDK into a 270MByte file.
It can be run and installed on a Windows PC. It contains all that is required (there maybe a Windows DirectX update).
A more permanent location for the file is being sort, but in the meantime it can be found at the link at the end of this posting.
Here are some screen shots ..
Screenshot 1:
http://i1240.photobucket.com/albums/gg499/fukushima3dmap/fuku3dmapUnreal1024.png
Screenshot 2:
http://i1240.photobucket.com/albums/gg499/fukushima3dmap/fuku3dreactor.png
As it is a gaming system, it will have 'bots trying to shot at you by default. You can turn them off in the settings before you start a round.
It would be great to take the file further, although it's taken nearly two weeks to get this far. Development will have to wait for another time.
The usual anti-virus warnings apply, all attempts have been taken to provide a clean file.
The download link is …
http://www.sendspace.com/file/wi0eex
Report Comment
Thanks ..richard..as Lennon used to say… "Fab gear".
Report Comment
http://www.youtube.com/watch?v=TfTeED-54dM&feature=bf_prev&list=UUDu1KkkwuzybKx6MXQgGHuw&lf=plcp
Report Comment
Smoky again on Fuku1 while TBS/JNN is frightfully pixellated black.
No half-life. We want full life!
Report Comment
the night 17/18 was pretty steamy but since that night i didn't can start my computer.
so it could take some days before i can load em up.
on the tbs record you can see that the white steam is coming from the area rea 5&6.
i'm talking about that event:
http://youtu.be/jtNN_9j3Wgw
@richard:
i'm burning to fix my systems as fast i can, sounds amazing what you had made.
@pure water:
one of the last things that i coud do was to check the voltages:
all were lower,like 12=11.71 3=2.89 etc
my question is now:
is that to low or not?
Report Comment
He said it is low. First you have to check what the grid provides, and then think about changing the supply device. My friends like your work!
Report Comment
merci,
please say him that i like his work too.
i had open the voltage and one of the elkos looks heated.
not to much that he had opened his head but i can see that there was some pressure in it/the black eloxyd is visible.
and there is now changing if i had plugged all devices or not to the voltage.
graficcard is also out, i use the onboard…
yesterday after some "push the buttons" reset with the high energy boost bios came but then it went black…
i had troubbles with my usb-ports onboard since some months and on that place is on elko def. overheated.
i had heared the voltages dying at the last three months, every hour a bitly more.
my rita said:"you didn't hear him crying?come on,have some mercy with him and give him a break"
me:"him?IT is a machine,build for working,bought for working and come on, what is one year nonstopless working?
i doe this for fourty years now , my sweatheart"
in my mind i thought we all gone to die,
somewhere,sometimes.
Report Comment
*means "not a changing"
Report Comment
@ Heart – It's daylight, black dot where new little light was. I think we gotta new "window".
Report Comment
@KONDY..I see…
Report Comment
@ richard:
the first screenshot shows a view like the regular tepco sreaming camera does.
from north to south with reactor 1-4 and the three pipes in the view.
but your grafics from reactor 1 & 2 are wrong.
reactor nr 1 had still the iron-inlet from the last upper stores standing.
reactor nr 3 is not demaged on one hight.
the west-wall is stiil standing with the iron inlay and the damage is going deeper from west to east, with the lowest point corner north-east.
and yape, you said you will work on the optics.
take it as a positive tip and feel you free to use from next link everthing as you want:
http://photobucket.com/fukunuk
@ all:
4545… & i are sure that the blue light was fukushopped,
taken from one of the blue hours from tbs.
verry suspected is a comment on fukudiary who said:
that at time the light were visible on tepcocam too.and as i looked it was just the blue lense flare in the pipe in front of rea 4 (30-50 meters,lol) and,
thats more importent,
the blue lense flare is visible since they plugged in their working light.
okay,
my comment was not published and i was wondering me…is that the man for that 4545.. and i spend hours and hours to bring online the missing hours for example?
and no fckng short email about why my comment is not posted?
that in the comment the proof of the nonsens in the thread was could be a reason for deleting it too.
http://fukushima-diary.com/2012/04/blue-light-observed-near-reactor-4/
http://youtu…
Report Comment
umm.. thanks nuck, i think.
this project has already cost me two weeks. i have no more time to do all the other details.
i am well aware that it is not accurate .. it's called an 'artist's impression'.
maybe over the ensuing decades of decomissioning to come there will be spare time to enhance the map. of course, i'll be dead by then.
for now, i've got a life to get back to, just in case
but please, download it, roam around it. it's a model to give some idea of scale and proximity. Nothing more. It would take a year of work to get it to accurate detail.
for me, i've enjoyed going from the perspective of the webcam and then flying around the square miles of the site. i am now far more aware of the overall structure of the site.
lastly, the original site model was by another artist and i am grateful for the massive work he/she had already done. i've compiled several sources into this project.. so it's not all my effort in the first place. projects such as this would normally take a team of people… not one player such as humble little old me.
please, just play in it.
Report Comment
you mean the busdriver project?
or was it truckdriver?
and yaya,
to play it will be one of the first things i will doe when my loosy pc will boot once again…
@pure water: i have found the tolerances that works regular, +-3-5%@ 5V and +- 10% by the 12V outputs,
that means i'm in.
but i've found a (bittersweat)suidside DIY test:
http://www.libe.net/image/atx.jpg
what a headline:
FUKUSHIMA WHISTELBLOWING CAT KILLED BY ELECTRIC POWER
nug nug
Report Comment
TBS/JNN with a close look at R4. Good quality is a rare thing for this cameras, and now we have it – better than most of the time.
Report Comment
whoah, pure water! thanks for the heads up! watching live from here. totally panning of the entire facility hurrah! http://realitycheck.no-ip.info/fukushima.html
this page has a live chat right next to the TBS/JNN cam for any who would like to comment … i drool for nuckelchen!
Report Comment
Changing the view took them several minutes. And before that it was fixed for more than an hour, as far as I was watching. Coincidence? This is possible too.
Report Comment
On the other hand I was able to see the buildings on the right of R4. There were some bright light evevnts in front of the highest among the structures there.
Report Comment
And now the screen went gray, while tepco camera shows a bright sunny day… and I have no more time for now.(I will read everything later, watching and reporting was a priority now.)
Report Comment
thanks for the eyes, pure water. i am watching off and on, but am mostly trying to synthesize spf4 info here
http://realitycheck.no-ip.info/forum/index.php/topic,193.msg574.html#msg574
waiting for the fog to lift … ode to the days when nuke.gov is dead http://www.youtube.com/watch?v=VXMlhr1BmBI&feature=related
aloha all
Report Comment
454541919 has posted these vids of TBS 19th April:
14.50 to 1514 I agree with pure water,best views we have seen from this cam in a long, long time.
http://www.youtube.com/watch?v=RJXe8TALSgI&feature=plcp&
=C4046384VDvjVQa1PpcFOfwuoLvty8wd_1VTfkOvAT0_ex2i6dLco%3D
A bit earlier – 13.02 to 13.23 Just wondering if they have been testing a new cam or at least trying to fix up the old one?
http://www.youtube.com/watch?v=PHbad67_WUY&feature=channel&list=UL
I'm still shocked by how badly R4 looks to be leaning. There now looks to be a big pipe running from the right of the building and a couple of work vehicles being busy, so work is underway on the new 'tent' I presume.
Report Comment
That was a trip! Right now, before my eyes,…I was watching the second youtube channel Wotcha posted above,….and tepco wiped the screen?, or a shadow passed before it, leaving a 'lens filter' behind? Almost like at the eye doctor. They changed the bloody resolution for the WAY WORSE! IT was all clear,..Yes,…I could SEE what was going on actually! Crap!
Did anyone else catch it?
Report Comment
Was there something burning or smoking on cam last night ?
Report Comment
Here's an even better YT clip posted by 454541919 Has cleaned it up for better viewing and zoomed in – great job:
13：12-14:52 2012-04-19 （TBS/JNN cam)
http://www.youtube.com/watch?v=AJUMpBEVFeo&feature=plcp&context=C40f5076VDvjVQa1PpcFOfwuoLvty8wd_1VTfkOvAT0_ex2i6dLco%3D
Shows the demolition of R4 with works machine tearing away at top right corner. Not sure what that white thing seen at middle front of building – it elevates and retracts. Is it ready-mixed concrete being put up for support??
Report Comment
Be sure to notice the person running around
Report Comment
Jnn/tbs showing recent demolition on #4 south wall..a bit hard to see and it looks paused.. Tepco cam is out..
Report Comment
Now TBS is shut, and tepco camera works. Gray sky and static cranes now.
And I worry about Nuck and his computer. May be he needs a live linux, or a new place, or a new computer. Come on, Nucky, say a word from somewhere!
Report Comment
without any booting from the hardware a linux-live-cd won't work.
but we should make a special one at nexts.
for stream-recordings and easy video editings.
with timelapse function, a converter for the flv records.
or better would be a video-editor-software that can work with flv..
the funniest at all is that 4545…had a total system breakdown one month ago….i will ask him what was the matter…
Report Comment
Rethink your whole system. Both you and 45… need to figure out how do they track you. If it was possible to distribute the whole process between different machines at different places, it will become clear easily. But I am dreaming now. If you were earnest money makers, you would not have the time to search for the truth.
And I know a person who lost a computer under installed linux just by lurking through facebook.
Take care!
Report Comment
Tepcam 18.50ish JST shows lights/fires broken out again at base of vent stack 2. This 'pit' area looks even more covered up by Tepco (blurring/fake plants?).
The TBScam view has again gone AWOL, maybe covering up what is more visible at night there, such as the recent blue light?
Report Comment
@nuckelchen Looking for you! We miss you.
Report Comment
ya,
i miss me too.
i'm sitting like a stupid bread in front of my black sreen.
not sure if i should buy a new voltage or a new *mutterbrett*,
thats fuku-kacka-lutschkie.
but i'm still proud to haven't any commercials in my channel (only the content-ones).
its just a bitly more difficult to make it, more chucky norris style.
a leatherman and gaffatape is what i need to save da world.
loel
snieff…screen is still black
Report Comment
"a leatherman and gaffatape is what i need to save da world."
You're so bloody right Nuck!
But, TPTB don't want to actually 'work'-work,…you know,…use a leatherman and ductape,…they'd rather 'do a study'!
Report Comment
The JNN cam is showing off to the right a bit.. I wonder why?
Report Comment
Oh Nuckie Darling, If I had any $$$ and weren't sehr pauper, ich woulda send u mucho dinero to buy all the top tech machines you want and need. Your work is great. Aber ich can only send blessings and love! Me miss u 2.
Report Comment
Nuck…erst dan…Gunther Grass, "What Must Be said"…
His poem statement von nukie war…
<http://www.sueddeutsche.de/kultur/gedicht-zum-konflikt-zwischen-israel-und-iran-was-gesagt-werden-muss-1.1325809>.
Schlaffen sie gut und mit grosse hoffnungsvoll!
And for you who don't know Germanglish, it's in Anglais translation. NO NUKES!
Report Comment
Still taking R4 apart:
See 454541919's vid: 08：36-12:5020.4.12 （TBS/JNN)
http://www.youtube.com/watch?v=l6tg1YJjWoM&feature=plcp&context=C47c46dfVDvjVQa1PpcFOfwuoLvty8wT9vm6QnKzr539ocua1lhQw%3D
Looks kinda scary to be doing such work so near to the SFP. About 5.20in a big piece of the building fell down!!
Report Comment
I wish these boys luck! And thanks for their efforts!
Have a look at this:
http://www.youtube.com/watch?v=_WL5YMAp1kY&feature=BFa&list=UUDu1KkkwuzybKx6MXQgGHuw
And the long version:
http://www.youtube.com/watch?v=nPE0VGyoVJg
If someone has watched this in real time, please, tell more. Is R1 making the camera go crazy, or something else?
Report Comment
@pure water I see what you mean about the cam going crazy. Looked like it was breaking down but it seems ok now. Very odd. I haven't seen any recent news about R1 – strangely quiet, but I'm not optimistic about it.
I don't like this new TBS view they are showing us. I wanna see the other half please, not just R4. The poor resolution and just blue is so bad, but 454541919 has been doing a great job on these poor views, such as:
09：41-16:11 21.4.12
http://www.youtube.com/watch?v=cRhB4CsgVeM&feature=plcp&context=C4abc179VDvjVQa1PpcFOfwuoLvty8wd_1VTfkOvAT0_ex2i6dLco%3D
I continue to be amazed at that demolition going on right by the R4's SFP, supposedly still loaded with fuel rods. How can that be? Would anyone else please like to comment on this too ………….
Report Comment
Cloudy day. TBS camera again turned on the right.
Report Comment
The Fukushima 3D Map now has a youtube demo and channel.
Please visit the channel to find out more …
http://www.youtube.com/user/fukushima3dmap
It is generated in the Unreal Development Kit, a 3D gaming system and is intended as a free educational tool to explore the campus and surrounds of Fukushima Daiichi. It's certainly not 100% accurate though, so please don't expect an epic quality, detailed experience.
Screenshot 1:
http://i1240.photobucket.com/albums/gg499/fukushima3dmap/fuku3dmapUnreal1024.png
The map has been packaged with the UDK into a downloadable file.
It can be run and installed on a Windows PC. It contains all that is required (there maybe a Windows DirectX update).
The download link is …
http://www.sendspace.com/file/wi0eex
Report Comment
another eq this morning, about 5 miles away from dainni…
Report Comment
Magnitude
4.5
Date-Time
Sunday, April 22, 2012 at 09:45:23 UTC
Sunday, April 22, 2012 at 06:45:23 PM at epicenter
Time of Earthquake in other Time Zones
Location
37.302°N, 141.217°E
Depth
24.5 km (15.2 miles)
Region
NEAR THE EAST COAST OF HONSHU, JAPAN
Distances
40 km (24 miles) NE of Iwaki, Honshu, Japan
75 km (46 miles) E of Koriyama, Honshu, Japan
83 km (51 miles) SE of Fukushima, Honshu, Japan
222 km (137 miles) NE of TOKYO, Japan
Report Comment
Tepcam: 'worklight' seems brighter tonight
Are they burning the demolition debris from R4 in this area? Please see the clip I posted @ 6.21 a.m. – the red machine is tearing away at the building and so near to the SFP.
Report Comment
Where is your post at 6:21 a.m.?
Report Comment
I see it now. This is from yesterday.
Report Comment
At 20:47 what are the white streaks above the bright light? They started maybe 20 minutes earlier and are still their on the live cam. Is this a fire?
2012.04.22 20:00-21:00 (Live Fukushima Nuclear Plant Cam)
http://www.youtube.com/watch?v=FeW1ufkMZLM&feature=plcp&context=C4a757ceVDvjVQa1PpcFMDOBqdIAx6AOBQV_bpybo–dz43Tg7AsA=
Report Comment
TYPO: there
Report Comment
anne, it looks like something is pulsing…
Report Comment
Coverup TEPCO webcam–the dark areas get larger and larger. Now they coverup the bases of objects on the right side of the screen.
Grading the view of TEPCO, Reactor 2, Reactor 1, Reactor 4/3. Steam/emissions are heavy over Reactor 2 and of course the whole area towards the right of the screen. Only major changes, the light to the side of Reactor 4 is larger and seems to grow and shrink.
Report Comment
TBS/JNN live cam is blacked out now.
Report Comment
RATS! TEPCO shuts down the cameras everytime we see a major event starting up. Rats rats rats..
Report Comment
There are now on the TEPCO live cam streaks of light on the upper right side of the bright light as well as those on the upper left. The steam or smoke is more. There is definitely something going on at the Centralized Waste Radiation Treatment Facility. Incineration?
Report Comment
Maybe burning debris from demolition of R4? It's been raining there as well and the place reacts badly to rain, gets steamy. But I do think they are burning stuff and it's being obscured by the light.
TBScam continues to be a waste of space – remains black. I reckon they turn either turn it off or turn the lights down at night so they don't have to monitor it.
Report Comment
TBScam video..they got cute and put up a photo–not live. When you click to stream..shows the black screen of death..
Now, how many people will notice the FAKE TBS photo instead of the live footage. OH..the fake photo..shows LOTS of emissions and radioactive events in Reactor 1 and 2, vent of Reactor 3 looks like a major burning event at the foot, plus Reactor 4 has a live flame. Wonder WHO picked THAT photo to use???
Report Comment
Raining now and tepco camera`s screen is covered with rain drops.No TBS/JNN.
Reding the posts above, I can add this:
http://www.youtube.com/watch?v=eOTcFpjsGtk
Explains many of the things, already said. Stay out of this rain!
Report Comment
@pure water Good video capture. Both webcams are carefully managed by Mr. TEPCOman. The emissions just keep streaming out, and behind the "bright light" coverup — Reactors 5 AND 6 –are they showing flashes? Could just be the rain drops, but since they coverup..must assume its a bad or worse situation for those two reactors.
Still the "floating" crane at Reactor 1, the "perfect" sides of Reactor 2, and lighting/pasted sides of buildings–just makes us all feel "safe"..right?
Thank you for being there! And to ENENEWS Admin, Nuckelchen, Anne, Wotcha, Whoopie..and many more who have to "wade" thru the hours to find visual proof of radiation contaminating OUR worlds .
Report Comment
Looks like an Obon Festival, a Japanese buddhist festival for the spirits of the dead where they float lanterns with candles inside down rivers and other waterways! Gives me chills. See here:<http://www.google.com/imgres?hl=en&sa=X&rlz=1T4GGLL_enUS327US327&biw=1623&bih=788&tbm=isch&prmd=imvns&tbnid=P7aVB3m1jQlfDM:&imgrefurl=http://tx.english-ch.com/teacher/shelle/level-b/the-obon-season/&docid=CexDrV2NBeETLM&imgurl=http://tx.english-ch.com/teacher/shelle/obon1.jpg&w=400&h=400&ei=nxKWT9u2KKWdiQLSofSICg&zoom=1&iact=hc&vpx=367&vpy=166&dur=14567&hovh=225&hovw=225&tx=159&ty=123&sig=103902828993650449854&page=1&tbnh=131&tbnw=147&start=0&ndsp=32&ved=1t:429,r:1,s:0,i:86>
Report Comment
This vid scares me. Looks like a huge cloud of fuku-spew over R2 and/or coming from R5-6! The camera screen is strangely seizing up. Movement of sections of the picture appear to fold/morph quickly then go back to normal, as though the cam is reacting to explosions with sudden jerking motion. The light show is stupendous under this big tent and continuous! Whatever is spewing in huge clouds in this vid, I count from (Sun) 4-22 4-5am (Japan time so actually this happens (Sat) 4-21 Noonish, PDT), plus two or three days (after checking the latest jet stream) until it hits the west coast, approximately Wednesday this week. Never mind potential contamination of the jet stream by Mitsui chemical explosions (lacking full disclosure of potential hazard, as usual).
2012.04.22 04:00-05:00 / ふくいちライブカメラ(long ver)
http://www.youtube.com/watch?v=nPE0VGyoVJg
Numerous oil rig disasters, continuous Corexit spraying, radiation leakages/bomb test fallout, and volcanic gases pouring up into the atmosphere equal an Epic, Worldwide, Technology Failure. It's hard to tell which is going to come first, an ELE from a natural solar 'kill shot/' earth changes or an ELE from man made disasters-
Lord have mercy on all life forms.
Report Comment
WTF??!!! If I had been watching that live I would have wet my pants! The live TEPCO cam looks really bad right now. The "fog" seems strategically placed….
Report Comment
Dear Nuck.. Sorry you are having tech problems..post here anyway..talk to me…I'm lonely without you.
Report Comment