Gauge malfunction causes bad data on river level near Cooper nuke plant

Published: June 21st, 2011 at 10:13 am ET
By
Email Article Email Article
39 comments


Gauge malfunction causes ‘bad data’ on river level, Lincoln Journal Star, June 20, 2011:

A malfunctioning pressure sensor on a Missouri River gauge near Brownville caused some “bad data” to be posted Sunday about flood conditions on the Missouri River near Brownville. [...]

The data posted by the weather service showed the Missouri River reaching 901.73 feet above sea level at Brownville, which is about three miles north of Cooper Nuclear Station.

Nebraska Public Power District officials are concerned rising flood waters could force them to shut down the nuclear power plant if the river reaches a level of 902 feet above sea level. [...]

The highest reading at Cooper on Sunday was 900.6 feet above sea level, [NPPD spokesman Mark Becker] said.

Published: June 21st, 2011 at 10:13 am ET
By
Email Article Email Article
39 comments

Related Posts

  1. Water level rose almost 3 feet during weekend at Brownville gauge near Cooper nuke plant June 20, 2011
  2. ‘Event’ at Cooper nuke plant: Uncontrolled release of oil into Missouri River after levees are over topped June 20, 2011
  3. Water level near Cooper nuke plant expected to rise this weekend, says National Weather Service June 25, 2011
  4. Top Ft. Calhoun nuke plant official: To get to a disaster level floodwater would have to rise 3.5 feet above current levels — No one has a model of what river is going to do, says NWS hydrologist June 18, 2011
  5. 100% chance of reactor core damage if floodwaters went above 1010 ft. at Ft. Calhoun nuke plant, NRC said in 2010 — River now around 1,007 ft. and expected to rise June 27, 2011

39 comments to Gauge malfunction causes bad data on river level near Cooper nuke plant